Carbon Steel的例句大全

The production practice of quasi-boiling carbon electrode steel in concast

连铸准沸腾碳素焊条钢的生产实践

Chromium and Health Chromium boride has been obtained by salt-bath boriding on chromium electroplated 45 carbon steel.

对45钢表面电镀硬铬层后，在熔渣中向45钢表面的电镀硬铬层渗硼获得了硼化铬覆层。

Surface Network Cracks in Low Carbon Boron Steel Casting

低碳硼合金钢表面网状裂纹成因分析

A Study on Delayed Fracture Resistance of Low Carbon Nb-V Microalloying High Strength Cold Heading Boron Steel

低碳Nb-V微合金化高强度冷镦硼钢耐延迟断裂性的研究

Influence of Ti Content on Austenite Grain Size and Grain Coarsening Temperature in Medium-carbon Boron Steel

钛含量对中碳硼钢奥氏体晶粒度及晶粒粗化温度的影响

The surface defects control of low carbon aluminium-killed steel

低碳铝镇静钢表面缺陷控制

Study on Improving Mechanical Performance of Low Carbon Aluminium Killed Steel

提高低碳铝镇静钢力学性能的研究

The high carbon steel wires could fulfill the transformation to pearlite in the 0.25% CMC aqueous solution. But the transformation temperature is higher than that in lead patenting due to its attribution of continuous cooling transformation.

高碳钢钢丝在0.25%CMC水溶液中可完全转变为珠光体组织，但其转变温度由于其连续冷却转变特性而高于在铅浴中的转变温度。

Nickel plated overlay in stem hole for carbon steel valves to combat severe alkylation conditions.

碳钢阀门采用阀杆孔内镀镍层的阀杆,适用于严酷的烃化应用环境.

Hot galvanized iron wire: The product structure of-quality carbon steel, the drawing, from hot-dip galvanizing process.

热镀锌丝: 该产品应用优质碳素结构钢, 经拉拔 、 热镀锌加工而成.

Cutting Heat Dissipation in High-Speed Machining of Carbon Steel Based on Calorimetric Method

碳钢高速车削中基于量热法的切削热分配

While forging the high-carbon chromium bearing steel by the finish forge press, there still remains the issues that the carbide network can not be crushed with the low qualification rate.

精锻机锻造高碳铬轴承钢时存在网状碳化物不易破碎、锻件合格率低的问题。

In order to detect the carbide network in high carbon hypereutectoid steel wire rods accurately, two kinds of detection method of the carbide network are compared.

为了准确地检验高碳过共析钢盘条中的网状渗碳体，分别对选用硝酸酒精溶液侵蚀和碱性苦味酸钠水溶液热侵蚀两种显示方法进行了比较。

Material: low carbon steel wire, aluminum magnesium alloy wire. Textile and characteristics: weaving and welding.

材料: 低碳钢丝 、 铝镁合金丝. 纺织及特点: 编织焊接而成.

Analysis of surface defects and cold-heading cracks of low carbon steel high speed wires

低碳钢高速线材的表面缺陷及冷镦开裂原因分析

He strength and ductility of low carbon cold drawn steel wire can be obviously increased by heat-treatment.

用普通低碳冷拔钢丝经热处理，提高钢丝的强度，增加其延伸性，使钢丝能够更有效地满足混凝土预制构件的要求。

Investigation on cause for breaking of high& carbon steel wirebar

高碳钢线坯断裂原因的研究

Influence of sulphate-reducing bacteria on Corrosion Behavior of A3 carbon steel

硫酸盐还原菌对A3钢电化学腐蚀行为的影响

Regression Curve and Testing of D2 type High-Carbon-and-High-Chromium Steel Carbides' Homogeneity

D2型高碳高铬钢碳化物均匀性的回归与检验

The effect of phosphorus on tempered martensite embrittlement ( TME ) has been studied in medium-carbon Si-Mn steel.

本文就杂质元素磷对中碳硅 — 锰钢回火马氏体脆性 ( TME ) 的影响作了研究,试验结果表明:钢中TME的存在并不决定于磷含量的多少,因为低磷钢或高磷钢中均可观察到TME现象.